McLaren 650S GT3 Badge McLaren 650S GT3

(ks_mclaren_650_gt3) DLC
McLaren 650S GT3, skin 00_racing_59
McLaren 650S GT3, skin 00_racing_59
McLaren 650S GT3, skin 2018_AGT_11
McLaren 650S GT3, skin 2018_AGT_58
McLaren 650S GT3, skin 2018_AGT_59
McLaren 650S GT3, skin 2018_AGT_7
McLaren 650S GT3, skin 2018_BGT_Balfe_101
McLaren 650S GT3, skin 2018_Objective_11
McLaren 650S GT3, skin 2019_IGT_11
McLaren 650S GT3, skin 537_stingrays
McLaren 650S GT3, skin 83
McLaren 650S GT3, skin CIF_Sport
McLaren 650S GT3, skin Skofic Motorsport
McLaren 650S GT3, skin mcl26
McLaren 650S GT3, skin racing_2
McLaren 650S GT3, skin racing_3
McLaren 650S GT3, skin racing_57
McLaren 650S GT3, skin racing_58
McLaren 650S GT3, skin racing_60
McLaren 650S GT3, skin racing_61
McLaren 650S GT3, skin racing_62
McLaren 650S GT3, skin racing_63
McLaren 650S GT3, skin racing_64
McLaren 650S GT3, skin racing_65
McLaren 650S GT3, skin w_great_britain

The 650S GT3 builds on the strong reputation that the 12C GT3 established in the racing world. Built around the same lightweight carbon fiber MonoCell chassis found in the 650S, the 650S GT3 offers a number of enhancements that ensure it is optimized on the track.

A very aggressive carbon fiber splitter has been added to the front to increase downforce, while larger intakes at the front allow for better cooling. The sides of the car have also been reworked, with optimized air intakes. In the rear, a large fixed carbon fiber wing stands out among the modifications made to the 650S for the GT3 iteration. Below the wing is a large rear diffuser and reworked bodywork.

Inside, the driver sits in a fully FIA-approved McLaren GT-developed race seat, which is fitted with a six-point race harness. In front of the driver is a bespoke motorsport digital dash directly behind the 650S GT3 steering wheel, modelled after the McLaren Formula 1 wheel design.

Of course, safety is a main concern when it comes to designing race cars, and that is why McLaren put a huge emphasis on this with the 650S GT3. Already mentioned in this article is the carbon fiber MonoCell chassis, with the addition of the FIA-approved rollcage that has been redesigned and is lighter than the one used in the 12C GT3.

Power comes from the award-winning 3.8-liter V8 twin turbo 'M838T' engine, producing around 500 hp, roughly the same power as the 12C GT3. Mated to the engine is an all-new six-speed sequential motorsport transmission.

Setups

There are no setups for this car.

Sessions

This car has been used in 4 sessions.

Tyres

  • Slick Hard (H)
  • Slick Medium (M)
  • Slick Soft (S)

Specs

  • Acceleration: --s 0-100
  • BHP: 500bhp
  • Power Ratio: 2.48kg/hp
  • Top Speed: 275+km/h
  • Torque: 500Nm
  • Weight: 1240kg

About